HOME

Tutorials

Guestbook

Links

Videos

Buy the CD

Quizzes

Blog

  :: WELCOME TO MYCADSITE.COM > VIDEO PAGE ::

About these AutoCAD videos:

These videos were created to work side by side with the rest of the HTML tutorials on this website. While they can be viewed independently, it is recommended that you also review the lesson that they apply to. These were produced using AutoCAD 2008 and newer version, and although the content applies to most versions, the screen layout may be different. If you want your screen to look like these videos, change to the "AutoCAD Classic" workspace. New tutorials are being produced for AutoCAD 2012 and newer versions.

More videos will be added over time, and will be seen on this page as well as the tutorial pages that they were designed for. If you have any comments about the videos, please send me an email at [email protected]

NOTE: If you came here looking for sample CAD files, you can find them here.

Share

I have a new video of my Photography that I would like share - take 5 minutes to relax with some soothing sunsets.

LEVEL 1    |    LEVEL 2    |    LEVEL 3    |    LEVEL 4

VIDEOS FROM LEVEL 1 OF THE TUTORIALS

 

VIDEO LINK
(NEW WINDOW)

TUTORIAL LINK

TUTORIAL

SUMMARY

Open the video in a new window

View the Webpage for this tutorial

Starting Commands in AutoCAD.

Describes the different ways to start a command in AutoCAD.

Open the video in a new window

View the Webpage for this tutorial

Assignment #1

Shows how to draw using Absolute, Relative and Polar input.

Open the video in a new window

View the Webpage for this tutorial

Exercise #1

Practice exercise using Accurate Input.

Open the video in a new window

View the Webpage for this tutorial

Exercise #2

Another practice exercise using Accurate Input.

Open the video in a new window

View the Webpage for this tutorial

Assignment #2

Using Rectangle, Multi Line, Extend, Offset, Trim and Osnaps

Open the video in a new window

View the Webpage for this tutorial

Exercise #3

Practice using common drawing and modifying commands

Open the video in a new window

View the Webpage for this tutorial

Exercise #4

Practice using Object Snaps

Open the video in a new window

View the Webpage for this tutorial

Bonus #1

Practice on Trim and Offset

Open the video in a new window

View the Webpage for this tutorial

Assignment #3

Reinforcing Accurate Input techniques

Open the video in a new window

View the Webpage for this tutorial

Exercise #5

Practice Accurate Input techniques

Open the video in a new window

View the Webpage for this tutorial

Exercise #6

Practice Accurate Input techniques

Open the video in a new window

View the Webpage for this tutorial

Lesson 1-5

Selecting Objects - Part 1

Open the video in a new window

View the Webpage for this tutorial

Lesson 1-5

Selecting Objects - Part 2

Open the video in a new window

View the Webpage for this tutorial

Assignment #4

Using Move, Copy, Stretch and Mirror

Open the video in a new window

View the Webpage for this tutorial

Exercise #7

Practice on modifying commands and geometry

Open the video in a new window

View the Webpage for this tutorial

Exercise #8

Practice on modifying commands and circle TTR option

Open the video in a new window

View the Webpage for this tutorial

Assignment #5

Using Rotate, Fillet, Chamfer and Array

Open the video in a new window

View the Webpage for this tutorial

Exercise #9

Using modifying commands to create shapes

Open the video in a new window

View the Webpage for this tutorial

Exercise #10

Using modifying commands to create shapes

Open the video in a new window

View the Webpage for this tutorial

Exercise #12

Using Array vs. Offset

Open the video in a new window

View the Webpage for this tutorial

Assignment #6

Layers and Dimensioning

Open the video in a new window View the Webpage for this tutorial

Lesson 1-9

Direct Distance Entry

Open the video in a new window View the Webpage for this tutorial

Lesson 1-9

Object Tracking

Open the video in a new window View the Webpage for this tutorial

Lesson 1-9

Dynamic Input

Open the video in a new window View the Webpage for this tutorial

Lesson 1-10

Changing Object's Properties

Open the video in a new window

View the Webpage for this tutorial

Lesson 1-11

Zoom and Pan around your DWG

Open the video in a new window

View the Webpage for this tutorial

Lesson 1-12

Orthographic Projection NEW!

Open the video in a new window

View the Webpage for this tutorial

Lesson 1-13

Section Views NEW!

       

VIDEOS FROM LEVEL 2 OF THE TUTORIALS

 

VIDEO LINK
(NEW WINDOW)

TUTORIAL LINK

TUTORIAL

SUMMARY

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-1

Setting up a drawing in AutoCAD

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-1

Approach for drawing a floor plan in AutoCAD

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-1

Approach for drawing a larger floor plan in AutoCAD

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-2

Introduction to blocks

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-2

Introduction to dynamic blocks

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-2

Creating advanced dynamic blocks NEW!

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-2

Writing a block to a separate file

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-3

Align and Rotate > Reference

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-3

Aligning a room to existing walls

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-4

Creating Attributes for Blocks (part 1)

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-4

Extracting Attribute Data (part 2)

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-6

Working with Text and MText

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-7

Working with Polylines

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-7

Creating Revclouds (Revision Clouds)

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-8

Working with Layouts

Open the video in a new window

View the Webpage for this tutorial

Lesson 2-10

Drawing Elevations in AutoCAD NEW!

       

VIDEOS FROM LEVEL 3 OF THE TUTORIALS

 

VIDEO LINK
(NEW WINDOW)

TUTORIAL LINK

TUTORIAL

SUMMARY

Open the video in a new window

View the Webpage for this tutorial

Lesson 3-2

Creating an Isometric Drawing

Open the video in a new window

View the Webpage for this tutorial

Lesson 3-3

Working in 3 Dimensions

Open the video in a new window

View the Webpage for this tutorial

Lesson 3-4

Viewing 3D Objects

Open the video in a new window

View the Webpage for this tutorial

Lesson 3-5

Creating wireframe models

Open the video in a new window

View the Webpage for this tutorial

Lesson 3-6

Using Line Thickness

Open the video in a new window

View the Webpage for this tutorial

Lesson 3-7

Extruding into Solid Objects

Open the video in a new window

View the Webpage for this tutorial

Lesson 3-7

3D Face | Extruding Text

Open the video in a new window

View the Webpage for this tutorial

Lesson 3-8

Revolved Objects NEW!

Open the video in a new window

View the Webpage for this tutorial

Lesson 3-9

Adding Materials and Basic Rendering NEW!

Open the video in a new window

View the Webpage for this tutorial

Lesson 3-10

Primitive Solids NEW!

Open the video in a new window

View the Webpage for this tutorial

Lesson 3-11

Boolean Operations NEW!

New videos that show commands for AutoCAD 2012 and newer

 

VIEWBASE

CLICK HERE

 
 

ARRAY - Rectangular

CLICK HERE

 
 

ARRAY - Polar & Path

CLICK HERE

 
 

JOIN

CLICK HERE

 
       

STAY TUNED FOR MORE VIDEOS - THERE'S PLENTY MORE TO COME!

       
ECS Group Visit the site
Go to Tenlinks.com TenLinks CAD Portal TenLInks CAD Portal

Owned and operated byArt Whitton, Chester, Nebraska
This web site is protected by Copyright 1999-2015 © Art Whitton

Last Update: